Today I finally gained the motivation to finish fitting the under felt to the car. This was a slow job as the foot wells on the Marcos car are not the easiest to gain access to. Cardboard templates were made first and then these were used to cut out sections of felt just slightly larger than the template. The sections of felt were then fitted and trimmed to size before being glued into place with contact adhesive. The first one to be completed was the passengers foot well and this proved to be much easier as there were no pedals in the way and you could also gain access from under the bonnet as the battery box has still not been fitted to the car. To make it easier to work on the drivers foot well the steering wheel was also temporarily removed but by the time I had finished gluing the felt in place my knees were sore and I was light headed from the glue fumes. The photo below show the completed drivers foot well.
